Manual Hand Pallet Stacker
Namae: Manual hand pallet stacker Details: Manual Hsnd psllet Stacker or Pallet Stackers are lifting equipment which commonly used in a warehouse or factory setting for Material handling. A stacker is a large machine used in bulk material handling. A manual hand pallet stacker is the most simple...
Description
Namae: Manual hand pallet stacker
Details:
Manual Hsnd psllet Stacker or Pallet Stackers are lifting equipment which commonly used in a warehouse or factory setting for Material handling. A stacker is a large machine used in bulk material handling.
| Capacity(KG) | 1000 | 2000 |
| Load Center(MM) | 550 | 550 |
| Fork Height(MM) | 1600 | 1600 |
| Min For Height(MM) | 70 | 90 |
| Fork Length(MM) | 930 | 1080 |
| Single Fork Width(MM) | 120 | 140 |
| Bearing(MM) | 70x80 | 70x80 |
| Rear(MM) | 50x180 | 50x180 |
| Overall Size(MM) | 1530x835x2040 | 1670x835x2040 |
| Net Weight(KG) | 150 | 180 |
A manual hand pallet stacker is the most simple and affordable type, and typically has a load capacity of 5,500 lbs. It consists of a steel trolley with a hydraulic pump and lifts pallets and heavy items by manually pumping the handle up and down. The operator works the manual stacker by positioning its two forks under a pallet and raising it off the floor using the lifting mechanism. Once the load is off the ground, you can manually steer it to its destination using the handle.
An advantage of the manual stacker is that it can be easily loaded into the back of a vehicle due to its small size and lightweight. However, it isn’t ideal for moving a load over longer distances, as it is quite labour-intensive for the operator. In smaller spaces, where lift height is not too high, the manual stacker is a perfectly adequate solution.
1. Can you help us to do some change about your product?
Yes, special drawing and design will be evaluated by our technical department, unit cost will be calculated by finance
department for your final confirmation. All procedures will be informed and confirmed with you in advance.
2. Can I get a sample?
Yes. Samples are welcome to us before mass production. But few extra cost and products cost will be charge from customer first,
and sample cost will be back to customer once started mass production.
Hot Tags: manual hand pallet stacker, China, suppliers, manufacturers, factory, wholesale, Chinese, 1T, 2T, 3T, 10T, 20T, made in China
