Standard Pallet Truck
The Standard pallet truck is steered by a' tiller' like lever that also acts as the pump handle for raising the jack. A small handle on the tiller releases the hydraulic fluid, causing the forks to lower.
Description
Instruction
The Standard pallet truck is steered by a' tiller' like lever that also acts as the pump handle for raising the jack. A small handle on the tiller releases the hydraulic fluid, causing the forks to lower. The front wheels inside the end of the forks are mounted on levers attached to linkages that go to levers attached to the jack cylinder. As the hydraulic jack at the' tiller' end is raised, the links force the wheels down, raising the forks vertically above the front wheels, raising the load upward until it clears the floor. The pallet is only lifted enough to clear the floor for subsequent travel. Often times, standard pallet jacks are used to move and organize pallets inside a trailer, especially when there is no forklift truck access or availability.
A jack typically has steering wheels in the front, while each fork usually has either a single wheel or two bogie wheels.
Hand pallet truck | |||||
Capacity | (kg) | 2000 | 3000 | ||
Lowest lifting height | (mm) | 80 | 80 | 80 | 80 |
Highest lifting height | (mm) | 200 | 200 | 200 | 200 |
Lifting height | mm | 110 | |||
Fork Length | (mm) | 1100 | 1200 | 1100 | 1200 |
Overall Forks Width | (mm) | 550 | 680 | 550 | 680 |
Individual Fork Width | (mm) | 230 | 360 | 230 | 360 |
Size of loading wheel | (mm) | φ80*70 | φ80*70 | ||
Size of driving wheel | (mm) | φ180*50 | φ180*50 | ||
Material of wheel | (mm) | Nylon/PU /Stainless wheels | |||
Hot Tags: standard pallet truck, China, suppliers, manufacturers, factory, wholesale, Chinese, 1T, 2T, 3T, 10T, 20T, made in China, Handle Puller Hoist, Lightweight 125kg 110volt Electric Chain Hoist, Electric Wire Rope Hoist, Electric Straddle Stacker, Electric Pallet Stacker, Electric Chain Hoist 200 kg
